`The pictures to the right show the ware factor of Rx pouch powder. The first picture is the top picture above ten+ years later. The second is the one directly above. We suggest a pouch for each gallon of paint and you add 1 part of powder to 5 part water. Roll over mold areas. Wait a couple hours to dry. Then use a 1 : 1 powder to water for the second cover and wait overnight. Paint over with a well rolled or brushed on application to have long lasting finish.
The company wanted to demonstrated the Rx Mold Solution ’s ability to penetrate deep into limestone shingles to pull out the mold. A definite task given the stain caused by mold held in the tiles. The workers applied the first coat in the centre picture, allowed a few hours to dry, then applied a flood coat allowing it to cleanse overnight. The left side shows it cleaned and the right needed the final cleaning right after. We may be restoring the Villas roofs shortly and coating with ELKEM award winning silicone seal that Meade had created
Tennis courts are sometimes covered with green limestone chips. The left are years of mold and stains which after two apps of the Rx100 the green on the right is proof it cleans